Wireless Power Meter for BMS system. Zigbee technology. Energy Save, Power Management for HVAC and Light. Show consumption

Wireless Control and Monitoring Power Consumption of Lights and HVAC in many remote Buildings for Energy Saving & Reduce Cost

Wireless Power Meter for BMS

Control large number of HVAC and Lights Simultaneously

Easy to use Graphical User Interface

2-way Communication

Show Online the real status of all Air Conditions, Heating, Lights and Blinds in a building. Status include Set Point Temperature, Room Temperature, HVAC Mode (On / Off / Heat / Cold or Auto), Fan Level, Keypad Unlock / Lock, Light On or Off and Blinds Open or Close.

Group Control

Select Single or Multiple Zones or Pre Defined Thermostat and Light and Control them all by 1 press of a button

Easy Installation (no wires)

Wireless Thermostat ensures installation is completed in matters of minutes. Retrofit - install in existing buildings. Simply replace the old thermostat and let it communicate with the master controller over the air by Radio Frequency 433MHz (m

odifiable frequency).

Compatible with Fan Coil

Connect thermostat directly to Fan Coil Units with standard wiring

The thermostat can then communicate with controller Wirelessly or by RS485

Compatible with Central AirCon

Wirelessly Control Central Air Condition with remote control via Infrared

Note: thermostat must be matched with the AirCon brand (Carrier, Daikin, Haier, LG, Mitsubishi, Samsung and more)

Reduce Wiring Cost of Fan Coil

Eliminate the wires between the Thermostat and the Fan Coil.

Connect the Fan Coil to IR interface and the IR thermostat will communicated with it wirelessly by IR (require eye contact)

Simple Setup (no programming)

This is as simple as it can be. If you know how to setup up you smart phone, you will know how to setup this BMS system

 

Each thermostat and light is given an address. Give it a name. You are done

User Interface in any Language

Each of the Zones, Thermostats and Scenes are named in any name and any language you wis. Names can be modified at any time after. These names are used in messages also

Save Energy – Auto Off

Add wireless Motion sensor to power off Lights and HVAC when room is left empty for preset period of time

 

Save Energy – Power Meter

System show online the power consumption and calculate the average cost per hour

Save Energy – Fix Set Point

  

  Lock thermostats at optimum set point and ensure user cannot change it.

  Ensure thermostats cannot be turned ON by user from the thermostat at certain period of times when  unnecessary.

HVAC + LIGHT combined

Thermostat and Light Switches are combined together on the same device for slick design on the wall

 

Smart Timer – Energy Save

Weekly Timer to power On or Off group of air conditions at certain times

 

Allow to set holiday dates to bypass the timer automatically.

Optional outdoor temperature sensor to bypass timer if outside conditions are idle

Sleep Timer – Energy Save

Countdown timer ensure AirCon are powered ON only for a preset amount of time to ensure they are power off

 

Safety First – Fire AC shut down

Automatically Power Off all the air conditions in case of a Fire to ensure smoke are not circulated in AirCon sys.

Interface with Fire Alarm system by Dry Contact or RS232

All Building/s Control

Control all HVAC and Lights in the building/s from main control room

 

 Messages Online

System will display messages about any abnormal status of any device

Local Zone Control by PAD

Control single zone by Android, iPad, iPhone, computer, etc.

 

 

Total Central Branch Control

Centrally Control all HVAC and Lights in many buildings around the country

Power Failure Restore

After power failure system will return back to its last knows status

Wireless Power Meter for BMS system. Zigbee technology. Energy Save, Power Management for HVAC and Light. Show consumption